Hardware flow control requires additional wires between the two devices.
2.
This is an example of hardware flow control.
3.
An example of hardware flow control is a Half-duplex radio modem to computer interface.
4.
However, the cable pin out merely loops back, and does not physically support the hardware flow control.
5.
This is accomplished through " hardware flow control " using extra lines on the modem computer connection.
6.
Common hardware handshake signals ( hardware flow control ) use the RS-232 RTS / CTS or DTR / DSR signal circuits.
7.
The software would work thinking it had hardware flow control but could suddenly stop when higher speeds were reached and with no identifiable reason.
8.
This cable is incompatible with the previous types of cables'hardware flow control, due to a crossing of its RTS / CTS pins.
9.
Hardware flow control is typically under the direct control of the transmitting UART, which is able to cease transmission immediately, without the intervention of higher levels.
10.
However, " hardware flow control " in the description of the options available on an RS-232-equipped device does not always mean RTS / CTS handshaking.
मोबाइल